|
|
| |
Education |
| |
-
EDF2085 Introduction to Diversity for Educators 3 credit hour(s)
An introduction to the value of diversity in American society and the manifestations and dimensions of diversity in the educational system. Focuses on providing prospective teachers with knowledge about students in American schools who are from different ethnic, racial, cultural and/or linguistic backgrounds or who represent other categories of diversity, and how the needs of diverse students may be addressed. Required field experience of 15 hours is a mandatory component of successful completion of this course. This course fulfills one of the lower division education core prerequisites for teacher education majors at all public colleges and universities in Florida. Must earn a grade of “C” or better for credit to be awarded. Lecture: 3 hours. There is a cost of $95 for fingerprinting and a security check required by Leon County Schools.
|
| |
-
EME2040 Introduction to Technology for Educators 3 credit hour(s)
Prerequisite(s): Open only to students who have completed 12 or more semester hours.
The purpose of this course is to prepare teachers and future teachers as competent computer-based technologists. This course is designed specifically for education majors. Students will learn how to successfully integrate instructional technology tools into their evolving teaching methodology. Based on the study of a wide range of successful technology integration models currently in use throughout the United States, students will cultivate their own sense of the importance of effective instructional technology modeling as a part of their teaching and learning strategies. This course requires a significant amount of time outside the class using a computer. A minimum 2.5 GPA is required for admission to teacher education programs in all state universities in Florida. Contact: 3 hours. This course fulfills one of the lower division education core prerequisites for teacher education majors.
|
Emergency Medical Technology |
| |
-
EMS1059C First Responder 3 credit hour(s)
Basic management of emergency medical/ pre-hospital care of the sick and injured. Provides the information and skills needed to recognize, properly assess and treat the sick and injured as a first responder. The first responder is a vital part of the pre-hospital, emergency medical services system. First responders are trained to reach patients, find out what is wrong, provide emergency care and, when necessary, move patients without causing further injury. These individuals are usually the first trained personnel to reach the patient. CPR certification is required for course completion and is available at an additional cost. Contact: 3 hours per week. Additional fee. Does not count toward A.A. degree.
|
| |
-
EMS1119 Emergency Medical Technician Lecture 7 credit hour(s)
Prerequisite(s): admission to the Emergency Medical Technician Applied Technology Diploma (B312) program.
Corequisite(s): , .
This course introduces the role of the emergency medical technician. It is designed to teach students to employ critical thinking skills to assess a patient scenario, create a plan of care and implement the plan. Topics include public health, anatomy and physiology, medical terminology, patient assessment, airway management, trauma, toxicological and environmental emergencies, submersion incidents, and infection control. Contact: 7 hours per week. Some online modules and Saturday class meetings required. Does not count toward A.A. degree.
|
| |
-
EMS1119L Emergency Medical Technician Lab 2 credit hour(s)
Prerequisite(s): admission to the Emergency Medical Technician program.
Corequisite(s): , .
This course involves the laboratory application of concepts and procedures studied in . Lab: 90 clock hours per semester. Does not count toward A.A. degree.
|
| |
-
EMS1431L Emergency Medical Technician Clinical 3 credit hour(s)
Prerequisite(s): admission to the Emergency Medical Technician program.
Corequisite(s): , .
This course provides clinical application of concepts and procedures studied in and . Clinical: At least 124 clock hours per semester. Does not count toward A.A. degree.
|
| |
-
EMS1525 Electrocardiography 2 credit hour(s)
A systematic approach to interpretation of the electrocardiograph (EKG). The course describes basic components of the cardiac cycle and their relation to the electrocardiograph. Basic skills in EKG lead placement and dysrhythmia interpretation are stressed, as well as advanced skills such as 12-lead interpretation, infarct location determination, axis deviation and conduction defects. Lecture: 30 hours. Does not count toward A.A. degree.
|
| |
-
EMS2018 EMS Competency Review 2 credit hour(s)
Prerequisite(s): permission of program chair.
Enables students who are re-entering the program to improve their competencies to be able to maintain pace in regular courses of the program, or for those students who have completed the program but need competency review to be able to pass licensure examinations, or for other students if recommended by the program chair. Content will be designed to meet specific needs of the student. Course cannot be used to meet degree requirements. Students are graded on the basis of satisfactory (S) or unsatisfactory performance (U). Contact: minimum of 30 hours per semester. Does not count toward A.A. degree.
|
| |
-
EMS2603 Paramedic I Lecture 8 credit hour(s)
Prerequisite(s): acceptance into the Paramedic program, and (or the series , , , ).
Corequisite(s): ,
Introduces topics such as EMS pharmacology, paramedic preparatory, patient assessment, respiratory emergencies and cardiac emergencies. Incorporates basic concepts of pharmacology, including pharmacokinetics, pharmacodynamics, adverse reactions, mechanisms of action and drug interactions for commonly used groups of drugs. Includes mathematics of drugs and solutions and principles of patient education regarding drug treatment. Includes instruction on proper methods of medication administration as pertains to the paramedic. Provides the student with the foundation necessary to understand the paramedic’s role within the medical community, with focus on the paramedic’s roles and responsibilities, the well-being of the paramedic, injury protection and medical-legal and ethical issues, as well as specific topics in pathophysiology and therapeutic communications. Patient assessment topics focus on the knowledge and skills necessary to thoroughly, accurately and rapidly assess patients found in the prehospital setting, with focus on history-taking, techniques of physical examination, clinical decision making, communications and documentation. Respiratory and cardiac emergency topics focus on the rapid, thorough assessment and pre-hospital treatment of patients with pulmonary and cardiac problems. The student will become knowledgeable of causes, complications, signs and symptoms and the full range of pre-hospital management of these serious patients. Contact: 8 hours per week. Does not count toward A.A. degree.
|
| |
-
EMS2603L Paramedic I Lab 2 credit hour(s)
Prerequisite(s): acceptance into the Paramedic program, and (or the series , , , ).
Corequisite(s): ,
Includes lab experiences required during the first semester of paramedic training. Basic life support skills are evaluated. Advanced life support skills such as advanced airway management, ECG interpretation and treatment of cardiac emergencies are taught and evaluated. Patient assessment/management treatment skills are emphasized. Contact: 90 clock hours per semester. Does not count toward A.A. degree.
|
| |
-
EMS2604 Paramedic II Lecture 8 credit hour(s)
Prerequisite(s): successful completion of EMS 2603 , EMS 2603L , .
Corequisite(s): , .
This course focuses on the many types of medical and traumatic emergencies encountered by EMS personnel. Medical topics covered in this course include neurology, endocrinology, allergies and anaphylaxis, urology, gastroenterology, renal, toxicology, hematology, environmental conditions, infectious and communicable diseases, behavioral and psychiatric disorders, gynecology, obstetrics, neonatology, pediatrics, geriatrics, abuse and neglect, patients with special challenges and the home healthcare patient. Trauma topic areas include trauma systems, mechanism of injury, hemorrhage, shock, soft tissue injuries, burns, head and facial trauma, spinal trauma, abdominal trauma and musculoskeletal trauma. Contact: 8 hours per week. Does not count toward A.A. degree.
|
| |
-
EMS2604L Paramedic II Lab 2 credit hour(s)
Prerequisite(s): successful completion of , , .
Corequisite(s): , .
Lab experiences required during the second semester of paramedic training. Advanced life support skills are taught and evaluated. Critical patient assessment/management related to medical emergencies and traumatic emergencies skills are emphasized. Skills related to pediatric and geriatric populations are also evaluated. Lab: 90 hours per semester. Does not count toward A.A. degree.
|
| |
-
EMS2605 Paramedic III Lecture 4 credit hour(s)
Prerequisite(s): successful completion of , , .
Corequisite(s): ,
Broadens the student paramedic’s knowledge in fields related to emergency medicine, including current issues, management techniques, legal and ethical aspects and provide the knowledge necessary to perform in and around rescue and crime scene operations. Hazardous material training at the awareness level is included. Includes a research paper. Contact: 135 hours per semester Does not count toward A.A. degree.
|
| |
-
EMS2605L Paramedic III Lab 3 credit hour(s)
Prerequisite(s): successful completion of , , .
Corequisite(s): , .
Familiarizes students with application of rescue techniques using hand and power tools, ropes, and other rescue equipment and provides a simulation experience covering a variety of pre-hospital emergencies. The simulation focuses on the paramedic student’s ability to integrate pathophysiological principles and physical examination findings to formulate a field impression and implement a treatment plan for patients with common complaints. Contact: 3 hours per week. Does not count toward A.A. degree.
|
| |
-
EMS2659L Paramedic Field Internship 3 credit hour(s)
Prerequisite(s): grade of C or better in all previous EMS courses and successful completion of the second semester of the paramedic program.
Includes assigned clinical rotations to complete the required clinical experiences during the final semester of paramedic training. Lab: 1 hour per week. Clinical: minimum of 112 hours per semester. Additional fees. Does not count toward A.A. degree.
|
| |
-
EMS2666L Paramedic I Clinical 4 credit hour(s)
Prerequisite(s): acceptance into the Paramedic program, and (or the series , , , ).
Includes assigned clinical rotations required during the first semester of paramedic training. Clinical rotations include phlebotomy, IV therapy, ambulance and emergency room rotations. Contact: Minimum of 164 hours per semester. Does not count toward A.A. degree.
|
| |
-
EMS2667L Paramedic II Clinical 4 credit hour(s)
Prerequisite(s): successful completion of , , .
Corequisite(s): , .
Includes assigned clinical rotations required during the second semester of paramedic training. Clinical rotations include pediatrics, labor and delivery, or intubations, ambulance and emergency room rotations. Contact: Minimum of 180 hours per semester. Does not count toward A.A. degree.
|
Engineering and Technology |
| |
-
BCN1001 Applied Math Concepts for Design and Construction 3 credit hour(s)
Prerequisite(s): MAC1105 .
An introduction to the practical mathematical skills needed for engineering, architecture, construction and design drafting. This course focuses on fundamental concepts of arithmetic, algebra, geometry and trigonometry. The course uses practical applications in a variety of technical and career vocations, including automotive, allied health, welding, plumbing, machine tool, carpentry, auto mechanics and HVAC. Contact: 3 hours.
|
| |
-
BCN1040 Introduction to Sustainable/Green Building Principles 3 credit hour(s)
An introduction to the concepts of sustainable design and methodologies. Lecture: 3 hours
|
| |
-
BCN2230 Construction Materials and Methods 3 credit hour(s)
An introductory course on materials used in residential and commercial construction, such as wood, steel and concrete; their components; and the method of their fabrication and assembly. Contact: 3 hours.
|
| |
-
BCN2241 Construction Operations 3 credit hour(s)
This course presents an introduction to the use and management of heavy construction equipment. The focus is on equipment identification, applications, cost of ownership and maintenance, time and motion studies, and earthwork calculations. Contact: 3 hours.
|
| |
-
BCN2272 Plans Interpretation 3 credit hour(s)
Interpretation and evaluation of manual and computerized working drawings (architectural and engineering) for residential, commercial and industrial building. Contact: 3 hours.
|
| |
-
BCN2405 Statics and Strength of Materials 3 credit hour(s)
Prerequisite(s):
Study of forces and loads on structures, vector analysis, truss design, free body diagrams, center of gravity and moment of inertia calculations, beam theory, shear and bending moments, bending and shear stresses in beams, and column analysis and design. Contact. 3 hours.
|
| |
-
BCN2704 Construction Contracts, Codes, Laws and Safety 3 credit hour(s)
This is an introduction to construction contracts; the Florida Building Code; federal, state and local contracting laws; jobsite safety rules and laws; and ethical issues facing construction contractors. Contact: 3 hours.
|
| |
-
BCT2705 Construction Management 3 credit hour(s)
Covers construction industry business entities; job-site cost control and accounting; job-site planning, scheduling and progress management; risk management, insurance and bonding; and project completion and closeout procedures. Contact: 3 hours.
|
| |
-
BCT2770 Construction Estimating 1 3 credit hour(s)
Prerequisite(s): MAC1105 ,
This course covers the reading of building plans and specifications, quantity measurements, calculations, and takeoffs. It also covers computer calculations of costs and modeling. The course includes computer-related examples and problems. Civil, environmental and construction management engineering majors and professionals will benefit from the course content. Contact: 3 hours.
|
| |
-
EET1084C Introduction to Electronics 3 credit hour(s)
This course provides an overview of electronics to acquaint the student with the principles upon which modern electronic devices operate. The course includes an introduction to the basic concepts of electricity and magnetism, electronic circuits and digital electronics. Contact: 3 hours. Does not count toward A.A. degree.
|
| |
-
EGN1111C Engineering Graphics 3 credit hour(s)
Emphasis on the principles of engineering graphics such as drafting techniques, lettering, geometric construction, freehand sketching, orthographic projection, sectional views, auxiliary views and pictorials. Prepares students to solve problems in descriptive geometry, such as true length and point view of a line, true size and edge view of a plane, angle between planes, and intersection and development of objects. Note: This course was previously numbered EGS1111C. Contact: 4 hours. Additional fee.
|
| |
-
EGN2112C Computer Application in Drafting and Design 2 credit hour(s)
Prerequisite(s): satisfactory completion of ETD2340 and ETD1320 .
Drafting and design related to civil engineering, architectural engineering, surveying and industrial construction. This includes surveying topographic, architectural, civil and industrial elevations, sections and details using the latest version of AutoCAD. Contact: 2 hours. Additional fee.
|
| |
-
EGS1002 Introduction to Engineering Technology 3 credit hour(s)
An introduction to the history, practical skills and careers in engineering technology. Lecture: 3 hours.
|
| |
-
ETD1320 Introduction to CAD 3 credit hour(s)
Prepares students to use a computer in technical communication, including the application of the latest version of AutoCAD in engineering, architecture, engineering technology, construction and related fields. Contact: 3 hours. Additional fee.
|
| |
-
ETD2340 Advanced CAD 3 credit hour(s)
Prerequisite(s): ETD1320 .
A continuation of ETD1320 . Application of advanced AutoCAD commands to the complex graphical figures in engineering, engineering technology, architecture and related disciplines. Software used is the latest version of AutoCAD. Contact: 3 hours. Additional fee.
|
| |
-
ETD2390 3D Auto CAD/Revit 3 credit hour(s)
Prerequisite(s): ETD2340 .
Introduction to the practical drafting skills related to 3D building-modeling skills needed for engineering, architecture, construction and design drafting. This course covers how to use the interface, how to create building designs with Revit and how to produce solid documentation. It also helps students prepare for Autodesk’s Certified Associate and Certified Professional exams. Contact: 3 hours.
|
| |
-
ETD2563C Fire Protection Design 3 credit hour(s)
Prerequisite(s): ETD1320 .
An introduction to the practical skills required to design water-based fire suppression systems. Hydraulic calculations for the most commonly encountered water-based fire protection systems are covered in detail. Manual hydraulic calculations are thoroughly covered. Students will calculate a wide variety of systems. Factors of successful design such as quality assurance, coordination and ethical practice are covered to provide a realistic perspective on professional application of the methods presented. The latest technology, including the design of high-speed water spray systems and water mist systems, is presented. Contact: 3 hours.
|
| |
-
ETI1110 Quality Assurance 3 credit hour(s)
This course defines the role of quality in an industrial environment. Topics include the use of quality management techniques and quality philosophies, process development, techniques used for evaluation, approaches used on continuous operations, methods used to control quality, and the International Organization for Standardization (ISO) series of standards. The responsibility of quality assurance during the engineering, manufacturing and marketing of a product is also covered. Contact: 3 hours. Does not count toward A.A. degree.
|
| |
-
ETI1420C Manufacturing Processes and Materials 3 credit hour(s)
This course introduces the physical properties and characteristics of materials, fuels, lubricants, solvents, coatings and commodities used in industry. Materials compatibility, basic metallurgy and treatment processes are also covered. Contact: 3 hours.
|
| |
-
ETI1622 Concepts of Lean Manufacturing and Six Sigma 3 credit hour(s)
This course provides an introduction to the basic principles and theories of lean manufacturing. Lean manufacturing involves identifying and eliminating non-value-adding activities in design, production and supply chain management. The course introduces the concepts of Juran, Deming, Taylor, Ford, Shingo and Ohno. Topics also include cost reduction, work-free manufacturing, continuous flow, Kaizen, the five S’s, value-stream mapping, modular manufacturing and overall equipment effectiveness (OEE). Contact: 3 hours. Does not count toward A.A. degree.
|
| |
-
ETI1701 Industrial Safety 3 credit hour(s)
This introductory course focuses on the principles of occupational safety and health in a real world, job-related setting. Topics include Occupational Safety and Health Administration (OSHA) compliance, safety standards, code enforcement, ergonomic hazards, mechanical hazards, falling, lifting, electrical hazards, industrial hygiene, radiation, noise, emergencies and environmental safety. Contact: 3 hours.
|
| |
-
ETM1010C Mechanical Measurement and Instrumentation 3 credit hour(s)
This course provides the basic foundation for mechanical measurement techniques used in manufacturing environments. The course integrates concepts, principles and techniques of mechanical measurement with the use of various types of instruments, including micrometers, vernier calipers, gages and other types of measuring equipment. Contact: 3 hours. Does not count toward A.A. degree.
|
| |
-
ETM2315C Hydraulics and Pneumatics 3 credit hour(s)
Prerequisite(s): satisfactory completion of EET1084C .
This course focuses on the basic principles of electromechanical, hydraulic and pneumatic systems. It takes a practical approach to technical problems involving hydraulics and pneumatics, fluid mechanics, hydrostatic forces, and pipe and pump operation, including the electrical circuitry needed to operate and control hydraulic/pneumatic systems. Contact: 3 hours. Does not count toward A.A. degree.
|
| |
-
ETS1511C Motors and Controls 3 credit hour(s)
This course explores the theory and application of AC and DC motors, types of single-phase motors, three-phase power, three-phase motors, remote and local control, forward and reversing motor starters, and various motor control circuits. Wiring and troubleshooting exercises of electric three-phase motor control circuits are emphasized in a wide range of applications. Contact: 3 hours. Does not count toward A.A. degree.
|
| |
-
SUR2100C Fundamentals of Land Surveying 3 credit hour(s)
Prerequisite(s): satisfactory completion of MAC1105 and BCN1001 .
Course includes basic principles of engineering surveys, land surveys, care and use of distance measuring equipment, leveling, transit traversing, area surveys, topographic surveys and stadia surveys. Contact: 4 hours. Does not count toward A.A. degree.
|
| |
-
SUR2200C Route Surveying 3 credit hour(s)
Prerequisite(s): satisfactory completion of SUR2100C .
Study of highway route design, route location factors, simple and compound circular curves, spiral curves, vertical curves, earthwork calculations, and analysis of surveying error. Contact: 3 hours. Does not count toward A.A. degree.
|
| |
-
SUR2390 GIS Application in Engineering and Technology 3 credit hour(s)
Covers application of geographic information systems (GIS) in engineering technology and related areas. It also provides students with an opportunity to gain hands-on experience in using Arcview software for data management in mapping and topographic survey. Contact: 3 hours. Additional fee. Does not count toward A.A. degree.
|
| |
-
SUR2392 Advanced GIS Application in Engineering & Tech 3 credit hour(s)
Prerequisite(s): satisfactory completion of SUR2390 .
This course is a continuation of SUR2390 and covers advanced topics in geographic information systems (GIS) and the application of GIS in engineering technology. It also provides students with greater hands-on experience in ArcView software to manage, manipulate, analyze and display spatially referenced data for solving problems in complex planning and management. Contact: 3 hours. Additional fee. Does not count toward A.A. degree.
|
| |
-
SUR2533 Global Positioning Systems (GPS) 3 credit hour(s)
This course covers the concepts and the latest knowledge and techniques in global positioning systems (GPS). Students learn the theory and skills needed to benefit from the application of this satellite technology in engineering and technology-related areas. It also provides students the opportunity to gain hands-on experience with GPS receiver and software. Contact: 3 hours. Additional fee. Does not count toward A.A. degree.
|
| |
-
SUR2534 Advanced Global Positioning Systems 3 credit hour(s)
Prerequisite(s): satisfactory completion of SUR2533 .
Course covers the advanced concepts and techniques in global positioning systems (GPS). Students learn the theory and skills needed to benefit from the applications of this advanced satellite technology in engineering and technology-related areas. It also provides students with the opportunity to gain hands-on experience with GPS receiver and software. Contact: 3 hours. Additional fee. Does not count toward A.A. degree.
|
English |
| |
-
CRW2001 Creative Writing 3 credit hour(s)
Prerequisite(s): completion of general education communications requirement.
This course offers instruction in writing fiction, poetry, drama and nonfiction and provides analysis of the student’s work. The guiding principles of creativity will be discussed and illustrated. Lecture: 3 hours.
|
| |
-
ENC1101 College Composition 3 credit hour(s)
Prerequisite(s): documented exemption, appropriate placement scores, or completion of developmental education reading and writing.
This course centers on reading and writing activities that support critical inquiry. Stressing writing as a process, the course emphasizes the rhetorical principles of academic writing, including the following: thesis statement; development with specific information and analysis; organization and transition; diction, tone and sentence style; and the grammar and the mechanics of standard formal English. Lecture: 3 hours. Substantial writing component. Fulfills state writing requirement. Students must complete this course with grade of C or better before enrolling in other communications courses.
|
| |
-
ENC1102 Argument and Persuasion 3 credit hour(s)
Prerequisite(s): grade of C or better in ENC1101 .
Building upon the writing skills developed in ENC1101 , this course focuses upon the rhetorical strategies and techniques required for writing college-level persuasive arguments. Lecture: 3 hours. Substantial writing component. Fulfills state writing requirement. Includes a research paper.
|
| |
-
ENC1141 Writing about Literature 3 credit hour(s)
Prerequisite(s): grade of C or better in ENC1101 .
This course continues to stress techniques of expository writing. Students will read and analyze various literary genres for form and meaning. Students should also gain increased understanding of and appreciation for those same creative elements in modern media. Lecture: 3 hours. Substantial writing component. Fulfills state writing requirement. Includes a research paper.
|
| |
-
ENC2210 Technical Communications 3 credit hour(s)
Prerequisite(s): grade of C or better in ENC1101 .
Does not fulfill the general education communications requirement. Designed to further mastery of the written communications encountered in the world of work. Focuses on the more rhetorical and persuasive aspects of effective technical communications. Students will become proficient in the use of standard professional correspondence (various types of letters, memos and email) and also write descriptions of objects and processes, instructions, reports and proposals. Contact: 3 hours.
|
| |
-
MMC1100 Writing for Mass Communication 3 credit hour(s)
Prerequisite(s): grade of C or better in ENC1101 .
An introductory course in the fundamentals of gathering, writing and evaluating news and opinion articles for the mass media, with emphasis on newspaper work and on-line production. Lecture: 3 hours. Substantial writing component. Fulfills state writing requirement. Includes a research paper.
|
Film |
| |
-
FIL1031 History of Film I 3 credit hour(s)
Prerequisite(s): satisfactory completion of ENC1101 .
Examination of the history of film, concentrating on initial theories, early development and technological advances through film’s maturity into a major art form and industry at the conclusion of World War II. Lecture: 3 hours.
|
| |
-
FIL2000 Film Appreciation 3 credit hour(s)
Prerequisite(s): satisfactory completion of ENC1101 .
A course to extend the knowledge and critical appreciation of film as an informed audience member and to amplify and intensify critical skills with regard to analyzing and evaluating films. Students will become familiar with a cross section of modern critical approaches, as well as individual and personal evaluations of films. Also focuses on the role and responsibility of the informed audience member with regard to film philosophy and theory, including the major genres and styles of film art. Lecture: 3 hours.
|
| |
-
FIL2032 History of Film II 3 credit hour(s)
Prerequisite(s): satisfactory completion of ENC1101 .
Examination of the history of film, concentrating on the development of the medium into an international art and industry from the end of World War II to the present. Includes an analysis of the strengths and weaknesses of the modern film industry. Lecture: 3 hours.
|
| |
-
MMC1540 Media Aesthetics 3 credit hour(s)
Prerequisite(s): satisfactory completion of ENC1101 .
This course is an introduction to media design and aesthetics. The course will introduce concepts and terminology while exploring how the media communicate meanings within a culture. Principles of visual literacy and how these principles may be used for the critical analysis of the media will also be investigated. Lecture: 3 hours.
|
Firefighter |
| |
-
FFP0010 Firefighter I 0 credit hour(s)
Prerequisite(s): Passing score on the Test of Adult Basic Education (TABE) and admission into the Firefighter certificate program.
This course covers science of fire, breathing apparatus, ladders, hose, nozzles and fire streams. The program also includes first responder medical and awareness-level hazardous material training. Upon successful completion of the course, and a written examination, the student will receive a certificate of competency from the Bureau of Fire Standards and training as a volunteer firefighter. Contact: 206 clock hours. Does not count toward A.A. or A.S. degree.
|
| |
-
FFP0020 Firefighter II 0 credit hour(s)
Prerequisite(s): Successful completion of .
This course prepares students for certification and employment as firefighters in accordance with Florida Statute 633. Classroom and field sessions form minimum standards training meeting Florida State, NFPA, and DOE Firefighter II requirements. Contact: 192 clock hours. Does not count toward A.A. or A.S. degree.
|
Foreign Language |
| |
-
FRE1120 Elementary French I 4 credit hour(s)
Basic elements of French usage taught in context. Emphasis is on pronunciation and comprehension. Lecture: 3 hours. Lab: 2 hours. Additional fee.
|
| |
-
FRE1121 Elementary French II 4 credit hour(s)
Prerequisite(s): grade of C or better in FRE1120 .
Continuation of FRE1120 . Lecture: 3 hours. Lab: 2 hours. Additional fee.
|
| |
-
GER1120 Elementary German I 4 credit hour(s)
Essentials of German, with emphasis on auditory experience, oral practice and the structure of the language. Lecture: 3 hours. Lab: 2 hours. Additional fee.
|
| |
-
GER1121 Elementary German II 4 credit hour(s)
Prerequisite(s): grade of C or better in GER1120 .
Continuation of GER1120 . Lecture: 3 hours. Lab: 2 hours. Additional fee.
|
| |
-
LAT1120 Beginning Latin I 4 credit hour(s)
Essentials of Latin, with emphasis upon grammar, syntax and Roman civilization. Lecture: 4 hours.
|
| |
-
LAT1121 Beginning Latin II 4 credit hour(s)
Prerequisite(s): grade of C or better in LAT1120 .
Continuation of LAT1120 . Lecture: 4 hours.
|
| |
-
SPN1120 Elementary Spanish I 4 credit hour(s)
Essentials of Spanish, with special emphasis on oral and aural practice in the language. Lecture: 3 hours. Lab: 2 hours. Additional fee.
|
| |
-
SPN1121 Elementary Spanish II 4 credit hour(s)
Prerequisite(s): grade of C or better in SPN1120 .
Continuation of SPN1120 . Lecture: 3 hours. Lab: 2 hours. Additional fee.
|
| |
-
SPN2220 Intermediate Spanish 4 credit hour(s)
Prerequisite(s): grade of C or better in SPN1120 and SPN1121 .
Develops the student’s reading, grammar, vocabulary and conversational skills and introduces certain literary and cultural concepts that will enhance comprehension of the unique qualities of Hispanic civilization. Lecture: 3 hours. Lab: 2 hours. Additional fee.
|
Geography |
| |
-
GEA2000 World Regional Geography 3 credit hour(s)
Prerequisite(s): documented exemption, appropriate placement scores, or completion of developmental education reading and writing.
A survey of the major regions of the world and their component areas. An examination of the principal physical, biotic and cultural elements in these places leads to an appreciation of the diverse environments and the common problems that exist in the world. Lecture: 3 hours.
|
| |
-
GEO1400 Introduction to Human Geography 3 credit hour(s)
Prerequisite(s): documented exemption, appropriate placement scores, or completion of developmental education reading and writing.
An introductory course surveying world demographic patterns and problems, human elements of geography and how those elements contribute to the development of regional cultural landscapes, processes of landscape development and modification, environmental problems that are related to human activity, current political and economic interdependencies, and activities related to global economic restructuring. Lecture: 3 hours.
|
Graphic Design/Multimedia |
| |
-
CGS1520 Introduction to Multimedia Programming 3 credit hour(s)
Prerequisite(s): documented exemption, appropriate placement test scores or completion of developmental education reading.
Prerequisite/Corequisite(s): recommended: .
Topics include multimedia applications, principles of video and sound manipulation, multimedia and the Internet, and design issues for multimedia programming. The student will use Adobe Flash for multimedia development and Adobe Photoshop for editing graphics. Hands-on projects are required. Contact: 3 hours. Additional fee.
|
| |
-
GRA1111C Graphic Design I 3 credit hour(s)
Corequisite(s): Recommended: .
An overview of the technical principles, fundamentals and terminology of the electronic publishing field. Introduction to professional-level software packages such as the Adobe Creative Suite of InDesign, Illustrator and Photoshop. Contact: 4 hours. Additional fee.
|
| |
-
GRA1206C Typography 3 credit hour(s)
Emphasis is on the practical application of typographic elements and on typography as an exclusive element of design, as it relates to the principles of good design and visual communication. This is web-based course. High speed internet, Adobe Creative Suite CC (Illustrator, Photoshop, InDesign and Acrobat), the textbook and access to a scanner and printer are required. In addition, students need a typography ruler that shows picas, points and inches; a sketch pad; and pencils and markers. The student is expected to have a working knowledge of current versions of Adobe Illustrator, Photoshop, InDesign and Acrobat. This can be achieved through GRA1111C . Additionally, instructor-prepared videos are available as a refresher. Contact: 4 hours. Computer Competency, Web-based Course.
|
| |
-
GRA2103C Computer Based Design I 3 credit hour(s)
Prerequisite(s): satisfactory completion of GRA1111C , GRA1206C and , or instructor approval.
Uses the principles of good visual communication and the computer for creating graphic design materials and products. Advanced design skills and functional knowledge of professional software programs such as Adobe Illustrator, InDesign and Photoshop are needed to successfully complete the course projects. Suggested co-requisite: GRA2121 . Contact: 4 hours. Additional fee.
|
| |
-
GRA2105C Computer Based Design II 4 credit hour(s)
Prerequisite(s): satisfactory completion of GRA1111C , GRA1206C and PGY2801C .
Corequisite(s): Suggested GRA2121 .
A continuation of GRA2103C , leading to more advanced topics and design projects. Uses the principles of good visual communication and design and professional software such as Adobe Illustrator, Acrobat, InDesign and Photoshop to successfully complete the course projects. From concept stage to electronic pre-press, the entire process will be studied, with finished portfolio pieces the final outcome. Contact: 4 hours. Additional fee.
|
| |
-
GRA2121 Publication Design 3 credit hour(s)
Prerequisite(s): satisfactory completion of GRA1111C and , or instructor approval.
Prerequisite/Corequisite(s): Recommended: .
Students gain an in-depth understanding of publication design while gaining proficiency in the most widely used page layout application in the professional field, Adobe InDesign. Single- and multi-page documents will be covered, including creating print-ready files. Students also receive an introduction to electronic publishing by designing publications for other formats such as tablets and smartphones (e-books, EPUBs, and electronic articles). Contact: 3 hours. Additional fee.
|
| |
-
GRA2140 Web Page Design 3 credit hour(s)
Prerequisite(s): satisfactory completion of CGS1820 .
Through the use of practical activities, students will learn advanced web development/design concepts and techniques. Topics include advanced CSS, templates, reusable objects, search engine optimization, e-commerce components, advanced page layout and introduction to dynamic web application development. Contact: 4 hours.
|
| |
-
PGY2801C Photoshop 3 credit hour(s)
Prerequisite(s): GRA1111C .
This course focuses on learning aspects of image manipulation, techniques needed for image retouching and working with multilayered compositions through the use of Adobe Photoshop. Contact: 4 hours. Additional fee.
|
Health Education and Safety |
| |
-
HSC1100 Concepts of Positive Living 3 credit hour(s)
Prerequisite(s): documented exemption, appropriate placement scores, or completion of developmental education reading and writing.
An introductory course in personal health, emphasizing healthy lifestyle behaviors. Specific topics include nutrition, exercise, mental health, sexuality, substance abuse, communicable diseases, chronic diseases and injury prevention. Contact: 3 hours.
|
| |
-
HSC1171 Wellness through Stress Management 3 credit hour(s)
Explores the nature and scope of stress in today’s society, with emphasis on the impact of stress on human health. Coping strategies for environmental, social and internally induced stressors are discussed. Contact: 3 hours.
|
| |
-
HSC2200 Principles of Contemporary Health 3 credit hour(s)
Prerequisite(s): documented exemption, appropriate placement scores, or completion of developmental education reading and writing.
A study of public health issues as related to the community and the individual. Cases, consequences, prevention and/ or possible solutions are explored. Contact: 3 hours.
|
| |
-
HSC2400 First Aid 3 credit hour(s)
College-level first aid course designed to teach students how to effectively assess and treat the first aid needs of the injured or ill patient. Course includes American Heart Association CPR certification at the healthcare provider/professional rescuer level. Course is especially recommended for students who plan to major in EMS, recreation, physical education or elementary education. Contact: 3 hours.
|
| |
-
HSC2531 Medical Terminology 3 credit hour(s)
Prerequisite(s): documented exemption, appropriate placement scores or completion of developmental education reading.
This course prepares students to analyze medical terms structurally; to spell and pronounce medical terms correctly; and to correlate an understanding of words and word elements with basic anatomy, physiology and disease processes. Contact: 3 hours.
|
Health Science |
| |
-
HSC1000 Orientation to Perioperative Services 3 credit hour(s)
Corequisite(s): .
The purpose of this course is to introduce the student to the surgical healthcare delivery system and provide an overview of the roles and responsibilities of members of the perioperative healthcare team. Common illnesses and emergency situations will be discussed, with a focus on prevention of disease and promotion of wellness. Systems of measurement, interpersonal skills, legal/ethical issues, basic medical terminology, infection control and the personal characteristics of the successful healthcare professional are included. Also included are the basic concepts of patient care skills. Topics include infection control techniques, patient and professional communication, proper patient identification, emergency skills, and monitoring patient status. Contact: 45 clock hours per semester. Does not count toward A.A. degree.
|
| |
-
HSC1000L Orientation to Perioperative Services Lab 1 credit hour(s)
Corequisite(s): .
This is a lab and clinical practicum to accompany . 45 clock hours per semester. Additional fee. Does not count toward A.A. degree.
|
| |
-
HSC1434C Central Processing Technology Lecture, Lab & Clinical 12 credit hour(s)
Prerequisite(s): , , , , ,
Corequisite(s): ,
Prepares students for employment in central service technology as they work with preceptors to gain the skills and competencies necessary for employment as central service technicians, supervisors, central supply workers, stock clerks in the stock room or warehouse, and processing technicians for hospital areas requiring expertise in sterilization, disinfection or decontamination. Provides experience in processing patient care equipment, instrumentation and supplies, along with observation of surgical procedures and rotations through relevant patient care and supply storage areas. Skills performed will include general cleaning, decontamination and disinfection, wrapping and packaging, linen folding, testing and selection of instrumentation and supplies, instrument tray and procedure tray assembly, sterilization techniques, clean and sterile storage, preparation of case carts, processing documentation, and distribution. This course uses demonstration, return demonstration, clinical performance under guidance of preceptor, discussion and textbook assignments. Contact: 622.5 hours per semester. Does not count toward A.A. degree.
|
| |
-
HSC1538 Medical Terminology for Healthcare Professionals 1 credit hour(s)
This is an introductory surgical technology course designed to provide the student with an understanding of medical terminology. Emphasis is on the structure and function of body organs and systems. Upon course completion, students will be able to combine prefixes, word roots, and suffixes to create medical terms related to surgery; construct and combine compound words; pronounce medical terms related to surgery; and identify the basic organizational structures of the human body, including body planes, general organization, and terms of reference. This course uses lecture, discussion, visual aids, small group activity and examinations. 15 clock hours. Does not count toward A.A. degree.
|
| |
-
HSC2520 Microbiology for Perioperative Services 3 credit hour(s)
This course covers the characteristics and activities of microorganisms. It surveys the various microbial groups, especially the bacteria, viruses and fungi, with emphasis on pathogenic forms. Bacterial growth, metabolism and genetics are discussed in some detail. Theories and methods of destruction, removal and inhibition of microorganisms in the environment are studied, as well as how the human body’s natural defenses act to protect against pathogenic microorganisms, principles of wound healing and infection control. Various significant aspects of infectious disease that occur in humans are also covered. Contact: 45 clock hours per semester. Does not count toward A.A. degree.
|
| |
-
STS1302 Introduction to Surgical Technology 4 credit hour(s)
Corequisite(s): .
This course introduces the discipline of surgery, including preoperative, intraoperative and postoperative care of the patient. Topics include the profession, healthcare facility organization and management, physical environment, mental health/personal hygiene, attire, gown/glove, professional ethics, legal issues in patient care, chart preparation, affirmative impact statement, aseptic technique, infection control, equipment, instrumentation, supplies, methods of disinfection and sterilization, sterile storage and distribution, hazards of the environment, environmental sanitation, and the typical sequence of surgery. An introduction to patient assessment, principles of electricity and robotics, and the specialties of surgery is included. Contact: 60 clock hours per semester. Does not count toward A.A. degree.
|
| |
-
STS1302L Introduction to Surgical Technology Lab and Clinical 2 credit hour(s)
Corequisite(s): .
This is a lab and clinical practicum to accompany . Lab: 90 clock hours per semester. Additional fee. Does not count toward A.A. degree.
|
| |
-
STS1310 Surgical Techniques and Procedures 4 credit hour(s)
Corequisite(s):
This course is designed to prepare students for the roles of the surgical technologist, including duties of the scrub role and duties of the assistant circulator. Other topics covered are chart review, patient identification, skin preparation, urinary catheterization, surgical counts, draping of the surgical patient, types of incisions, principles of wound healing, hemostasis and exposure of the operative field. Insertion of surgical drains and application of surgical dressings, along with relevant terminology, specimen care, pharmacology and anesthesia principles are covered. Actions are emphasized that facilitate the usual sequence of the surgical procedure for all segments of perioperative care, including the preoperative, intraoperative and postoperative care of the patient. Overview of surgical specialties is included, with emphasis on common surgical procedures. Contact: 60 clock hours per semester. Does not count toward A.A. degree.
|
| |
-
STS1310L Surgical Techniques and Procedures Lab and Clinical 2 credit hour(s)
Corequisite(s):
This course is designed to prepare students for the roles of the surgical technologist, including the scrub role in surgical procedures, tissue handling techniques, wound closure techniques, preparation of suture, passing of instruments and the surgical setup for common procedures. Actions are emphasized that facilitate the usual sequence of the surgical procedure for all segments of perioperative care, including the preoperative, intraoperative and postoperative care of the patient. Lab and Clinical: 90 clock hours per semester. Additional fee. Does not count toward A.A. degree.
|
| |
-
STS1340 Pharmacology and Anesthesia 2 credit hour(s)
This course is designed to introduce students to pharmacological agents most commonly used for surgical patients in each phase of the perioperative experience and those used in the treatment of complications and emergencies. Emphasis is on preoperative medications and on anesthetics and medications used within the sterile field, stressing identification, preparation, measurements, handling/transfer and use. Other topics include pain management, airway and respiratory management; IV fluid and electrolyte replacement therapy; and a comparison of the types of anesthesia, physiological effects, complications, and treatment. Contact: 30 clock hours per semester. Does not count toward A.A. degree.
|
| |
-
STS1925C Endoscopy Basics Theory and Lab 4 credit hour(s)
Prerequisite(s): , , , , ,
Corequisite(s): ,
Upon completion of the course, the student will have a basic understanding of the care and handling of endoscopic equipment, including storage, testing, decontamination, disinfection and preparation for use. Modules include anatomy and physiology review relevant to endoscopy procedures, essential communication, roles and responsibilities of the endoscopy team, equipment, risk management, safety, reprocessing/infection control, and emergency preparedness. Contact: 90 hours per semester. Does not count toward A.A. degree.
|
| |
-
STS1926C Endoscopy Technician Theory and Lab 6 credit hour(s)
Prerequisite(s): , , , , ,
Corequisite(s): ,
Course is designed to prepare students for the role of GI technician regarding flexible endoscopic procedures including the specialties of gastroenterology and pulmonology. Contact: 180 hours per semester. Does not count toward A.A. degree.
|
| |
-
STS2323 Surgical Procedures I 4 credit hour(s)
Corequisite(s):
This course is designed to prepare students for surgical procedures, including the review of surgical anatomy, physiology, pathophysiology, relevant equipment, supplies and techniques regarding general surgery, endoscopic surgery, gynecological and obstetrical surgery, genitourinary surgery, orthopedic surgery, and otolaryngology surgery (ear, nose and throat) and diagnostic procedures and relevant equipment, supplies and techniques. Depth of coverage will be determined by the Core Curriculum for Surgical Technologists published by the Association of Surgical Technologists. Contact: 60 clocks hours per semester. Does not count toward A.A. degree.
|
| |
-
STS2323L Surgical Procedures I Simulation Lab 2 credit hour(s)
Corequisite(s):
This lab course accompanies and includes the completion of mock surgical core procedures to facilitate the student’s ability to anticipate the steps of the procedure and permits the evaluation of the student’s performance regarding the critical elements of the surgical technologist’s responsibilities. Lab: 90 clock hours per semester. Does not count toward A.A. degree.
|
| |
-
STS2324 Surgical Procedures II 4 credit hour(s)
Corequisite(s):
This course is designed to prepare students for specialty surgical procedures. Topics include surgical anatomy, physiology, pathophysiology, relevant equipment, supplies and techniques in plastic and reconstructive surgery, maxillary/mandibular surgery, oral surgery, neurosurgery, cardiothoracic surgery, peripheral vascular surgery, trauma, and surgery for all ages. Depth of coverage will be determined by the current edition of the Core Curriculum for Surgical Technologists, published by the Association of Surgical Technologists. Contact: 60 clock hours per semester. Does not count toward A.A. degree.
|
| |
-
STS2324L Surgical Procedures II Simulation Lab 2 credit hour(s)
Corequisite(s):
This lab course accompanies and includes the completion of mock surgical core procedures to facilitate the student’s ability to anticipate the steps of the procedure and permits evaluation of the student’s performance in regard to the critical elements of the surgical technologist’s responsibilities. Lab: 90 clock hours per semester. Does not count toward A.A. degree.
|
| |
-
STS2361 The Art of Teamwork in Surgery 1 credit hour(s)
This course introduces students to the principles of Human Factors science as applied to the system of care, teaching them about the skills needed to function effectively and safely in teams in a modern surgical environment. The course covers the background psychology of interpersonal interactions and evidence from other industries about barriers to safe and effective team communication and cooperation. Students will develop their teamwork and communication skills and explore the principles of hierarchy and power distance, personal styles and coping strategies, situational awareness, secure communications loops, use of checklists and standard operating procedures, how to deal with team dysfunction, leadership, followership, effective briefing and debriefing, models of risk and error in healthcare, and risk minimization in systems involving humans. Contact: 15 clock hours per semester. Does not count toward A.A. degree.
|
| |
Page: 1
| 2
| 3
| 4
| 5
| 6
| 7
|
|
|
Print this Page